响应面法优化Zn-Mn-Co/HZSM-5催化乙醇脱水制乙烯
DOI:
作者:
作者单位:

作者简介:

通讯作者:

中图分类号:

基金项目:

“十一五”国家科技支撑计划 (No. 2006BAC02A17) 资助。


Optimization of ethylene production from ethanol dehydration using Zn-Mn-Co/HZSM-5 by response surface methodology
Author:
Affiliation:

Fund Project:

National Science and Technology Pillar Program during the Eleventh Five-Year Plan Period (No. 2006BAC02A17).

  • 摘要
  • |
  • 图/表
  • |
  • 访问统计
  • |
  • 参考文献
  • |
  • 相似文献
  • |
  • 引证文献
  • |
  • 资源附件
  • |
  • 文章评论
    摘要:

    采用响应面法研究温度、乙醇浓度、质量空速对锌、锰、钴改性的HZSM-5催化乙醇脱水制备乙烯过程中乙烯收率的影响。结果表明反应温度对乙烯收率影响最大,并且各因素之间存在交互作用。用响应面方法确定乙醇脱水制备乙烯的最佳工艺条件是:温度261.3 ℃,乙醇浓度34.4%,质量空速1.18 h?1,在该条件下乙烯收率达到98.69%。

    Abstract:

    The effects of reaction temperature, ethanol concentration and weight hourly space velocity (WHSV) on the ethylene production from ethanol dehydration using zinc, manganese and cobalt modified HZSM-5 catalyst were investigated by response surface methodology (RSM). The results showed that the most significant effect among factors was reaction temperature and the factors had interaction. The optimum conditions were found as 34.4% ethanol concentration, 261.3 °C of reaction temperature and 1.18 h?1 of WHSV, under these conditions the yield of ethylene achieved 98.69%.

    参考文献
    相似文献
    引证文献
引用本文

王伟,程可可,薛建伟,张建安. 响应面法优化Zn-Mn-Co/HZSM-5催化乙醇脱水制乙烯[J]. 生物工程学报, 2011, 27(3): 412-418

复制
分享
文章指标
  • 点击次数:
  • 下载次数:
  • HTML阅读次数:
  • 引用次数:
历史
  • 收稿日期:2010-07-20
  • 最后修改日期:
  • 录用日期:
  • 在线发布日期:
  • 出版日期:
您是第位访问者
生物工程学报 ® 2024 版权所有

通信地址:中国科学院微生物研究所    邮编:100101

电话:010-64807509   E-mail:cjb@im.ac.cn

技术支持:北京勤云科技发展有限公司